How do I bond Slate-Lite to the façade?

Slate-Lite can be simply bonded to the mineral substrate reinforced with reinforcing mesh as a final top layer on a standard ETICS façade.
The basic structure of the ETICS façade is carried out in accordance with current regulations and standards.

The reinforcing mesh must be located in the upper third of the render layer (executed in accordance with VOB/C[1]ATV-DIN 18350, DIN EN 13914 and DIN 18550), whereby the thickness of the render layer must not be less than 5 mm.
Unevenness must not exceed ± 3 mm so that the adhesive application with a B3 notched trowel provides sufficient adhesion.

For optimum bonding, we recommend our Slate-Lite Extreme Adhesive.
The following video shows an example of basic bonding with our Extreme Adhesive: