2K-protection Wall 625ml

Slate-Lite 2K-Protection Wall is a two-component, abrasion-resistant protective seal based on a polyurethane combination.
Mix the two components in a 4:1 ratio. Leave to stand for approx. 10 min after mixing. Then apply evenly and full with a nylon roller. Allow to dry.
ATTENTION: There is a stronger darkening of the material! Do not use in standing water boddies or surfaces.

• Easy cleaning
• Smooth surface
• Intensifies the colours of the material
• Short drying time
• Content: 625 ml
• Consumption: approx. 100-250g/m2 per coat
• Suitable for: Walls, Shower & Bathroom
• Resilience: High
• Color change: High
• Suitable for wet areas, but not for standing water
• minimum 1- application for low-load walls
  • Coverage:1x time  applied ca. 7 Standard Sheets 122x61cm
• minimum 2- applications when used in shower & bath
  • Coverage:2x times  applied ca. 3,5 Standard Sheets 122x61cm
• minimum 3- applications when used as a tile mirror / in the cooking area
  • Coverage:3x times  applied ca. 2 Standard Sheets 122x61cm

Download: Color change
Download: Data SheetDownload:

Download: Safety Data Sheet (Sealer)
Download: Safety Data Sheet (Hardner)